How to select a proper Planetary Gearbox for meeting specific application requirements, following factors need to be considered:
+ Gear Ratio Generally speaking, the reduction ratio can be simply explained by the formula: Reduction Ratio = RPM-servo motor / RPM-gearbox output.
Gear ratio also can be defined as the correlation between the numbers of teeth of two different gears. Commonly, the number of teeth a gear has is proportional to its circumference. This means that the gear with a larger circumference will have more gear teeth, therefore, the relationship between the circumferences of the two gears can also give an accurate gear ratio.
Gear ratio also can be defined as the correlation between the numbers of teeth of two different gears. Commonly, the number of teeth a gear has is proportional to its circumference. This means that the gear with a larger circumference will have more gear teeth, therefore, the relationship between the circumferences of the two gears can also give an accurate gear ratio.
+ Output TorqueOutput torque is important parameter when choosing a planetary gearbox. Gear reduction reduces the relatively high rotational speed of motor, delivering a lower rotational speed at the output end.
+ Overload TorquePeak overload torque is the short-term overloading of the permitted output torque.
+ Speed (RPM) Speed is proportional to the gear ratio of the system. If the input gear has more teeth than the output gear, the result will be increase in speed at the output shaft. On the other hand, having the reverse scenario with more gear teeth at the output compared to the input will result in a decrease of speed at the output shaft. In general, the output speed can be determined by dividing the input speed by the gear ratio. The higher the ratio the lower the output speed will be and vice versa.
+ Backlash Backlash is the angle in which the output shaft of a gearbox can rotate without the input shaft moving or the gap between the teeth of two adjacent gears. It is not necessary to consider backlash for applications which do not involve load reversals. If the motion cycle is exactly repeated the backlash of planetary gearbox has theoretically not influence on the repeatability. However, in precision applications with load reversals like Robotics, Automation, CNC Machines, etc., backlash is crucial for accuracy and positioning.
Choosing an applicable Reduction Ratio
- Ideal Reduction Ratio = Motor Speed (RPM) /Gearbox Output Speed (RPM)
PHT ｜ VERTEX PRECISION COMPONENTS CORP.
No. 115-10, Xiaguirou Mt., Tamsui Dist. New Taipei City 251, Taiwan
Phone: +886-2-2250-9940 Website: www.vtx-precision.com